MC 22 MGC Front Floorpan
We were restoring another MGC Roadster (April ’08) and were totally fed up with the poor quality of the MGC front floorpans so I decided to manufacture a press tool to make both O/S and N/S panels. The pressings are 5mm deep and shaped for only minor fitting to be required.
A pair for £160.00 plus VAT or £90 per side plus VAT.
MC 22 MGC Front Floorpan
This is the O/S MGC floorpan and these items are available from us at £90 each plus VAT or £160.00 plus VAT for a pair
MC 22 MGC Front Floorpans
New batch of floorpans.
MGC Torsion Bar Support Panel
We are also now making the torsion bar support panel for both the O/S and N/S. These have sold well and we have made some new tooling to make them even better than before.
The N/S panel as shown in the photo is £165.00 plus VAT and the O/S with the pressing and fittings for the wiring loom is £255.00 plus VAT or the pair can be had for £370.00 plus VAT.
MGC Torsion Bar Support
This is the O/S torsion bar support panel with the pressing and fittings for the loom and pipes. Also has the bends in place so that only minor fitting is required.
£255 + VAT
Torsion Bar Support
This is how our panels look when fitted and painted on our MGC.
MGC Front Floor Pans
And this is how the floor pans look from the underside.
MGC Torsion bar support plate
To compliemnt the other panels we have made we now produce the support panel that fits between the floor and the torsion bar panel. £60.00 each.
Floor drain hole cover
To make the car look right why not fit these drain hole covers. £7.50 each plus VAT.
MGC sill finisher piece
Sill finisher piece. £12.00 each plus VAT.
MGC servo pipe
Correct servo pipe for the Girling Mk2b servo. To replace the the Austin pipe that is often found on MGCs that rubs on the bonnet. £48.00 plus VAT.
MGC Inner wing repair panel.
This is an inner wing repair panel that is often corroded. On the RH the panel is solid but on the LH has the middle removed. £35.00 plus VAT.
AHC 154 MGC engine restraint RH
I have remade the MGC engine restraint brackets, often missing from the MGC. AHC 154 RH bracket £17.50 plus vat.
AHC 155 LH engine restraint. £17.50 plus vat.
I have remade the MGC engine restraint brackets, often missing from the MGC. AHC 154 RH bracket £17.50 plus vat.
MGC king pin dust tube set
MGC king pin dust tubes and spring set remade from high grade plastic and a new, old stock spring. £19.00 each plus vat.
MGC Radiator support bracket RH
MGC radiator support bracket remade to correct specification with a 5/16 unf stud welded on. £17.50 plus vat
MGC Radiator support bracket LH
LH radiator bracket £17.50 plus vat
